Payment & Shipping Terms:
|Material:||Carbon Steel Sheet Metal||Color:||Custom Made|
|Process:||Custom Made||Power Supply:||AC|
|Standard:||ISO IEC UL|
Process Customized Flooring Radiant Panel Test With Command Full Set / Control Set
The pavement thermal radiation tester is developed in accordance with ISO 9239-1, ASTM E648 and GB / T 11785 test method for the burning performance of flooring materials. It can be used to determine the thermal conductivity of carpet, floor coverings and roof insulation when the flame spreads transversely. Critical heat flux values, while the material can be detected in the combustion test smoke density of the development process.
ISO 9239-1: Fire testing of flooring materials - Part 1: Testing the burning properties of floor materials using radiant heat sources.
ISO 9239-2: Fire testing of flooring materials - Part 2: Test conditions for flame spread when heat flux is 25 kw / m².
ASTM E 648: Standard Test for Critical Radiant Flux of the Floor - The cover system uses a radiant heat source.
ASTM E 970: Standard Test for Critical Radiant Flux of Loft Insulated Floor Using Radiant Heat Energy Using Radiant Heat Energy.
NFPA 253: Standard Test Method for Testing the Critical Radiant Flux of a Side Plate Coverage System Using a Radiant Thermal Energy Source (National Fire Bureau Code, Vol.6).
GB / T 11785-2005.
1, The use of blower device, the air supply to the radiation board, abandoned the practice of using air compressors in the past, because the air compressor for the intermittent, can not effectively guarantee the continuity of its gas supply
2, The use of water-cooled heat flow meter, while providing automatic cooling water cycle, no external cooling water users
3, Equipped with stainless steel suction hood device, placed above the combustion test box
4, The cabinet wall is aluminum silicate board, high temperature and corrosion resistance
5, With 300mmX450mm porous ceramic heat radiation board, 30 degrees angle installation
6, To provide T-porous burner, the sample applied to open flame, push the use of electric push-mode
7, The optical system includes light source for the 2900 ± 100 K color temperature incandescent lamp
8, The gas control part: the use of needle valve to adjust the flame height of T-type burner, propane mass flow meter to adjust the gas flow plate, digital display
9, The inverter to adjust the air volume of the blower, comes with a blower to provide air source, mixed by Venturi mixture test gas.
10, Water-cooled heat flow meter, the working range of 0-50 kW / m2, heat flow meter accuracy <± 2%, the response time of 0.2 s, to provide portable cooling water, no external water.
11, Equipped with a standard set of porous calibration board device, heat flow meter calibration using mobile lifting mode, the user can move heat flow meter, and convenient calibration of radiation radiant heat flux, while the test software can draw thermal radiation flux curve
12, Equipped with 19-inch computer, the user can monitor the entire combustion test software testing process.
13, With stainless steel specimen clamp device.
14, The installation of chimney thermocouple and the thermocouple of each one, and computer software display.
15, With infrared radiometer, can detect radiation plate temperature, and computer software display
16, Optional smoke density test system.
Size of equipment: 2220 (W) × 1500 (D) × 2650 (H) mm.
Control box 1: 600 (W) × 600 (D) × 1600 (H) mm.
Control box 2: 600 (W) × 600 (D) × 1000 (H) mm.
Power supply AC 220V, 25A.
Weight about 220kg.
Gas source purity of more than 95% propane.
Packages & Delivery: